LX H30-R1 Spa Heater 3 kW - 1,5 inch

LX H30-R1 3kW heater for spas

The LX H30-R1 3kW is a good heater suitable for almost all spas. LX heaters are widely used in spas manufactured in China. A spa heater heats the water in your spa. The water is pumped through the heater by a circulation pump. The LX H30-R1 3kW is equipped with a flow protection device. With a standard 1.5-inch connection, the spa heater is very easy to replace.

Capacity and consumption LX H30-R1 3kW

The LX H30-R1 3kW consumes 3.0 kW at full power against a maximum flow of 400 litres/min.

Use and installation LX H30-R1 3kW

When installing the LX H30-R1 3kW, you generally don't need any additional materials. Make sure the connections match and the heater is roughly the same size so you don't have to make any changes to the piping. If you have a different connection, use a connector. The LX H30-R1 3kW measures 29 x 16 x 5 cm (L x H x W).

Every spa has the option to close the valves to stop water from flowing through the heater. A small amount of water may still escape when you remove the heater. Make sure the spa is turned off. You can now safely replace the heater. Always read the manual before replacing the heater.

Features LX H30-R1 3kW

• CE and TUV certified
• Standard connection